 |
 |
 |
 |
|
 |
|
|
|
|
| |
 |
100%
Polypropylene Cartridge made from very fine
fibers. Polypropylene media gives wide chemical
compatibility
Read
More
|
|
| |
 |
Nominal
rated Wound cartridges are widely used as
a pre-filter for economical filtration. It
is available in different media and core for
wider chemical compatibility.
Read
More
|
|
| |
 |
RBC-II
cartridge is resin bonded, cellulose depth
type, graded pore structure. Grooved and un-grooved
options available for more surface area.
Read
More
|
|
| |
 |
High
dirt capacity pleated depth filter cartridges.
A
variety
of end fittings to suit existing housings.
Read
More
|
|
| |
 |
Polyethersulfone
(PES) membrane with polypropylene support
layer and polypropylene hardware cartridge.
Read
More
|
|
| |
 |
PTFE
membrane with all -Fluoropolymer construction
for high temperature applications.
Read
More
|
|
| |
 |
For
more technically demanding dust filtration
applications, ceramics are highly efficient,
achieving better results than often demanded
by legal requirements.
Read
More
|
|
| |
 |
Sintered
S.S. cartridges are produced by cold isostatic
pressing, which gives the high prosity material
its shape stability an properties of a metallically
strong component.
Read
More
|
|
| |
 |
Filter
housing is only the hardware to house the
cartridge. It is not that simple. Design of
filter housing needs lot of skill to consider
many parameters.
Read
More
|
|
| |
 |
Economics
is very important in almost all the area.
When contamination level is high, it is better
to use pre-filter. Bag filter is proven economical
pre-filter.
Read
More
|
|
| |
 |
A
hydraulic filter consists of the element,
the housing and additional accessories like
by pass valve, contamination indicator, reverse
flow valve etc.
Read
More
|
|
|
|
|
|
|
Industrial
Filter in India
Techno-Filter
International is Manufacturer and Exporter of
Filter Housing, Industrial
Filter Cartridges in India, Filter Media and
cartridges, Industrial Cartridges in India, Process
Filter, and Industrial Filter Cartridges in Ahmedabad,
Baroda, Surat, Mumbai and Gujarat. We are Manufacturing
and Exporting Hydraulic
filter Cartridges in India, Industrial
Filter Cartridges in India, Bag
Filter, Filter
Housing in India and Compressed
Air Filter in India.
|
|
 |
Contamination
is still the main reason for trouble
and down times of a hydraulic system.
Contamination is already created during
the manufacturing the components and
in addition the fluid has basic contamination.
During operation of the system further
contamination is created by abrasion
and seal material. Filters in a hydraulic
system have to reduce this contamination
to an acceptable level. Thus by filter,
conditions are created for a trouble
free and low-maintenance operation.
A
hydraulic filter consists of the element,
the housing and additional accessories
like by pass valve, contamination indicator,
reverse flow valve etc. The housing
is made up of the head and the bowl.
The element consists of the internal
body, the pleated star and the end plates.
With only few exceptions, the fluid
flows in filter -out- to- in.
|
|
|
|
|
The hydraulic filter needs additional
accessories like by pass valve and indicators.
Since operating pressure is high, it is necessary
to change the element (or clean the element
in case of re-usable) as soon it reaches its
limited differential pressure. To indicate
the same, indicator is required in the filter.
Many varieties of indicators are available
- Visual indicator & electrical indicator.
Electrical indicator gives indication by blowing
the bulb or alarm. If somebody ignore the
indications, it is obvious that the differential
pressure of filter will increase and in worst
case filter may burst! To avoid such situation,
by pass valve is required to by pass the fluid
and protect the filter. It is important that
in such case, un-filtered fluid will go in
to the system.
|
|
FILTER CARTRIDGE : |
|
|
The
type of filter medium used is very important
for the success of hydraulic fluid and lubricant
filtration, particularly in the case of pressure
line filters for the most part, the type of
filter medium used are:
-
Impregnated Cellulose Paper
- Micro
fiberglass or
- S.S.
Wire Mesh.
|
SUCTION LINE FILTER
: |
|
Suction
line filter are installed immediately
upstream of the pump to protect the
pump against all coarse contaminations.
Since pumps are very sensitive to low
pressure, large filter would have to
be installed to prevent the increasing
differential pressure at the filter
from causing damage to the pump. Hence
coarser filter is generally selected
for suction line. Many times only one
side threaded and other closed element
is installed at the end of suction line
in to the tank.
|
|
PRESSURE LINE FILTER
: |
|
Pressure line filters must be installed
downstream of the pump and pressure
relief valve to protect upstream of
the components. If systems dose not
aloud interruption, we need to put duplex
filter.
|
|
|
RETURN LINE FILTER
: |
 |
Return
line filters are those filters,
which are installed in the lines leading
back to the tank. The filter head is
permanently mounted to the tank and
the outlet port of the filter projects
into the tank itself.
Return
line filters collect all those contaminants,
which are flushed out of the system
and not captured by pressure line filters.
|
|
DUPLEX FILTER :
|
|
For un-interrupted operations, duplex
filters are required in hydraulic system.
This is a sat of filter connected with
inter connecting valves to keep one
as a stand-by and one filter in operation.
|
|
|
SPIN-ON CARTRIDGE :
|
|
|
|
AIR BREATHER FILTER
: |
|
|
|
TECHNO-FILT
INTERNATIONAL
Contact
Person : Shailesh Shah [Mobile
No. : +91- 9825924824]
C/5,
Anmol Complex, N.H. No. 8 ,
Nr. C.T.M./Nirala, Amraiwadi, Ahmedabad -
380 026 INDIA
Phone No. : +91-79-22873062, 22875382
; Fax : +91-79-22873062
Email : info@techno-filt.com
Site:
www.techno-filt.com
|
|
|
|
|
|
|
|
|
|
